CAP NFT-1E RECYCLING TIMER

C.A.P NFT-1e Preset Recycling Timer is the simplest device available for turning a device ON and OFF at precise intervals. The NFT-1e Timer is pre-set to turn ON for 1 minute and OFF for 4 minutes. Plug the NFT into any standard outlet. Plug whatever you want to control into the receptacle on the front face and you're done. C.A.P NFT-1e Preset Recycling Timer is rated for 15 amps @ 120 volts. 3 year no hassle warranty.

 TITAN APOLLO 1

Digital control board allows for precise timer settings.3 seconds to 30 minutes "on-time" and 3 minutes to 8 hours "off-time".Very easy to set and use.Will run CO2 system with switch set to 'day' position.Use to run a pump with the switch in the 'both' position.Will run an exhaust fan with switch set to 'night' position.Durable powder coated steel enclosure will stand up to the toughest conditions.The green LED light on the front of the controller shows the user when the timer is 'on'.15 Amps/120 Volt/60 Hz.3 year warranty.

TITAN APOLLO 2

10 seconds to 20 minutes 'ON TIME'.1 minute to 12 hours 'OFF TIME'.Controls timed equipment during daytime only, nighttime only or both.Use to time fans, pumps or CO2.Plastic enclosure protects internal components from dust and moisture.15 Amps/120 Volts/60 Hz./1/3 HP.3 year warranty.

 TITAN APOLLO 3

1 minute 'on-time' & 4 minute 'off-time'.Timing is preset – requires no user adjustments.Ideal for aeroponic, ebb & flow or misting applications.Excellent for NFT – Nutrient Film Technique-systems.Plastic enclosure protects internal components from dust and moisture.10 Amps/120 Volt/60 Hz.3 year warranty.

TITAN APOLLO 4

The Apollo 10™ - 240Volt/24 hour programmable timer is the perfect timing solution for your hydroponic systems. With a 10 amp capacity, it’s easy to set to run your lights, pumps, fans, etc. The Apollo 10™ has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules for any timing configuration that the grower may require. Flexible, dependable and easy to use!

TITAM APOLLO 6

The Apollo 6™ - 24 hour programmable timer is the perfect timing solution for your hydro systems. With a 15 amp capacity, it’s easy to set to run your lights, pumps, fans, etc. The Apollo 6™ has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements.

 TITAN APOLLO 7

The Apollo 7™ - 24 hour digital timer is the perfect timing solution for your hydro systems. With a 15 amp capacity, it's easy to set to run your lights, pumps, fans, etc. The Apollo 7™ may be set to 1 minute intervals and run 8 separate schedules per day. The Apollo 7™ can be configured in numerous timing schedules to meet the most demanding timing requirements.

TITAN APOLLO 8

The Apollo 8™ - 24 hour programmable timer is the perfect timing solution for your hydro systems. With two outlets and a 15 amp capacity, it’s easy to set to run your lights, pumps, fans, etc. The Apollo 8™ has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements. 



TITAN APOLLO 9

The Apollo 9™ - 24 hour digital timer is the perfect timing solution for your hydro systems. With two outlets and a 15 amp capacity, it’s easy to set to run your lights, pumps, fans, etc. The Apollo 9™ may be set to 1 minute intervals and run 8 separate schedules per day. It can be configured in numerous timing schedules to meet the most demanding timing requirements.

TITAN APOLLO 10

The Apollo 10™ - 240Volt/24 hour programmable timer is the perfect timing solution for your hydroponic systems. With a 10 amp capacity, it’s easy to set to run your lights, pumps, fans, etc. The Apollo 10™ has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules for any timing configuration that the grower may require. Flexible, dependable and easy to use!

THERMOMETER AND HYGROMETER

Measures indoor/outdoor temperature & indoor humidity. Stores the Min./Max. values of the indoor/outdoor temperature and indoor humidity. Switch between °C and °F. Clock function with alarm and a 12/24 hour mode switch. 8 minutes snooze function. Waterproof temperature probe. Comes with 1 AAA alkaline battery. One year warranty.

• This controller will run four (4) HID lights at 240 Volts – Maximum 4000 Watts.
• The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays.
• 120 Volt accessory timed outlet to activate in-line fans to cool your lamps.
• German built 24 hour timer with 15 minute non-detachable setting tabs.
• Universal outlets allow total flexibility.
• 3 screws in back panel makes timer easy to wire into your power system.
• On/Off switch that makes lamp replacement easy.
• Durable powder coated steel chassis.
• 30 Amps/240 Volts/60 Hz./4000 watts.
• 3 year warranty.

• This controller will run four (4) HID lights at 240 Volts – Maximum 4000 Watts.
• The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays.
• 120 Volt accessory timed outlet to activate in-line fans to cool your lamps.
• German built 24 hour timer with 15 minute non-detachable setting tabs.
• Universal outlets allow total flexibility.
• 3 screws in back panel makes timer easy to wire into your power system.
• On/Off switch that makes lamp replacement easy.
• Durable powder coated steel chassis.
• 30 Amps/240 Volts/60 Hz./4000 watts.
• 3 year warranty.

Unequivocally the best choice for moderate to large scale gardens, the MLC 12XP4 lighting controllers deliver performance and value while still providing the safety and reliability you have come to expect from C.A.P. These devices are capable of controlling up to 12 lights from a single trigger cord. Simply attach a 24-hour timer or control device to the 120 volt trigger cable, set your interval and you’re done. The MLC-12XP4 feature standard Universal X-Plug outlets, which allows for running your ballast at 120/240 volts without having to change out your ballast power cords and 4 outlets to control your equipment at 120 volts.

• This controller will run for four (4) HID lights 240 volts.
• The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays.
• Plug relay trigger cord into 24 hour wall timer to run your lights.
• Multi-tap outlets allow total flexibility.
• Plastic enclosure resists dust and moisture.
• 20 Amps/240 Volts/60Hz./4000 Watts.
• 3 year warranty.