C.A.P. HLC-3e LIGHT CONTROLLER
The C.A.P. HLC-3e Light Controller combines the functions of the HLC-1e and HLC-2e to protect your expensive HID lights from hot starts and your garden from high temperatures. A high temperature shutdown provides insurance from crop damage due to high heat from ventilation and cooling problems. When connected to your lights, or light controller, it will monitor your growing area's temperature and disable your lights if the maximum temperature you specify is exceeded. This unit also has an indicator light to let you know that your temperature set point was exceeded.
The HLC-3e will also sense a power interruption and start a 15 minute time delay to keep your lights from trying to re-fire during the cool down period. Comes with a 12' remote temperature sensor. The HLC-3e is rated at 15 amps @ 120 volts. 3 year no hassle warranty.
Cylinders are made from exclusive L6X® alloy specially optimized by metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. Minimum burst pressure tested to 2.5 times service pressure without failure. CO2 tanks are shipped empty and do not contain CO2.
The AIR-2 has the same features as the AIR-1 with the exception of separate temperature and humidity outlets. This allows you to control the temperature and humidity independently. Once you have connected your temperature control device (air conditioner, fan, etc) and a dehumidifier to the AIR-2, your desired temperature and humidity are automatically maintained. The AIR-2 is rated for 15 amps @ 120 volts.
The TMP-DNe allows you to control the temperature within your growing environment. You can set the day and night temperaute independently. The TMP-DNe can be set to either heat or cool. Just connect your equipment, then set the temperature that you wish to maintain. If the temperature varies from your setting, the outlet on the front is activated. The temperature differential can be set at 3, 5 or 7 degrees. Comes with a 12'' remote sensor.
The AIR-3 expands our line of atmospheric controllers by providing the ability to coordinate supplemental CO2 with your ventilation equipment. The AIR-3's operation is similar to the AIR-1, with the addition of a photo cell and CO2 outlets. The photo cell ensures that your CO2 device (CO2 valve or generator) only activates when your lights are on. To conserve CO2, the CO2 outlets are automatically disabled while your ventilation equipment is running.
The AIR-4 has all the features of the AIR-3 with the addition of independent temperature and humidity controls. It also has an increased power capacity to control up to 15 amps of equipment. An additional outlet is provided which will power equipment only during the 'day' cycle. Features include independent temperature and humidity control, coordinated CO2 sequencing and an additional outlet that is powered only while the lights are on.
The TMP-1 allows you to control the temperature within your growing environment. Just connect your air conditioner or fan, then set the temperature that you wish to maintain. If that temperature is exceeded, the outlet turns on your equipment until the temperature decreases below the set temperature by 5 degrees. Comes with a 3' remote sensor.
The Apollo 6™ - 24 hour programmable timer is the perfect timing solution for your hydro systems. With a 15 amp capacity, it’s easy to set to run your lights, pumps, fans, etc. The Apollo 6™ has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements.
We also carry model #'s 7,two plug in #8,9 and the 240#10
Healthy Harvest South
3837 river rd n
NEXT TO UPTOWN MUSIC JUST NORTH OF SONIC
Healthy Harvest Indoor Garden
1635 se tv hwy #1
hillsboro, or 97123
Phone: 503 640-0995
Tues thru Friday 11am to 7pm Sat 10am to 6pm closed Sunday, Monday
Stop in to check out all the items currently discounted in our Keizer location.Everything in store 20 to 30% off msrp daily we don't need special sales. We price match our local competetors