SOLIS-TEK DIMMABLE INTELLIGENT E-BALLASTS

This 4-step dimmable ballast has Ignition Control™, Sequential lamp ignition technology. Multi wattage capable. SolisTek Digital Ballasts are tuned for minimal Total Harmonic Distortion (THD%) output to lamps. The results are longer ballast and lamp life and less depreciation of lumen and par output over time. SolisTek also offers the industry's only true Ignition Control™ staggered ignition techology. SolisTek SenseSmart™ which will check for 8 different factors before attempting to power the lamp.

GALAXY GRO AMP SELECT-A-WATT ELECTRONIC BALLASTS

Galaxy® state-of-the-art HID ballasts are manufactured to provide today’s serious grower with maximum flexibility & performance.  Galaxy ballasts have an incorporated staggered low current starting feature to avoid inrush problems when running multiple ballasts. The Galaxy low voltage ignition is easier on the lamp start, reducing arc tube wall blackening resulting in a longer more stable lamp life.

GALAXY ELECTRONIC BALLASTS

• Pre-programmed with a digital random start feature.  Ballast will delay 1-3 seconds each time it starts. Reduces in-rush current spikes when starting multiple ballasts at a time.
• Smart Volt feature allows ballast to run on 120, 208 or 240 volt power.
• Resettable circuit breaker for short circuit protection.
• Operates both HPS & MH lamps.
• Extremely efficient – 99% power factor.
• Generator ready.
• 3 year warranty.

<< New image with tex

t >>

<< New image with text Galaxy® Legacy® DE 1000 watt operates on 120-240 volt power and features high frequency 105 kHz micro processing technology for running double-ended lamps. This Legacy® DE Select-A-Watt® ballast can operate a 1000 watt lamp at 600, 750, 875, 1000 and 1150 watts. This ballast will properly operate a 600 and 750 watt lamp as well. Set the desired wattage on the Select-A-Watt® dial and install the correct lamp. Units are air-cooled for excellent thermal management. Feature a 600 Volt German-made MOSFET for increased reliability. Legacy® DE ballasts comes pre-wired with a dual universal lamp cord receptacle that is compatible with all Sun System® brand reflectors as well as other branded reflectors. Includes Convertible Smart Volt® Dual Ferrite Power Cord 120-240 volt 6.5 ft with 120 and 240 volt plugs. This ballast is lightweight, soft starting, fan cooled and features green LED indicator lights.>>

<< New image with tex

t >>

<< New image with text >The Sun System® 1 Etelligent™ Compatible LEC™ brand technology 315 ballast is optimized for cutting edge Light Emitting Ceramic® brand technology. This ballast has a thermally optimized non-fan cooled aluminum housing while operating on 50/60Hz low frequency, square wave which makes this electronic ballast highly efficient. The Sun System® 1 LEC™ technology 315 ballast operates at 120 or 240 volt and has a rated life of 50,000 hours. Sun System® 1 LEC™ brand technology 315 watt dimmable ballast operates a 315 watt ceramic metal halide lamp, ANSI: C182, at 50%, 60%, 70%, 80%, 90%, & 100%. This ballast includes a prewired lamp cord receptacle that is compatible with all Sun System® LEC® brand reflectors. The Sun System® 1 LEC™ features controller-compatible signal ports for on/off/dimming functions as well as an ambient thermal temperature probe. The Sun System® 1 Etelligent™ Controller Kit #902245 (sold separately), allows up to 400 Sun System® 1 ballasts to be daisy-chained together. This controller allows wired control of the on/off/dimming capabilities of Sun System® 1 ballasts. A 15 foot Etelligent™ signal wire and a Convertible Smart Volt® Dual Ferrite Power Cord 120-240 volt 6.5 ft with 120 and 240 volt plugs is included.>

<< New image with text >>